Posted by steve cree on April 10, 19102 at 07:41:34:
In Reply to: Re: Stripping paint from and refinishing wood posted by sharon medlock on February 17, 1999 at 13:48:56:
: : After using a heat gun to initially remove the paint from the trim work, if you have varnish, you need to use a 3m scrubbing pad with denatured alcohol to dissolve the old varnish.
Use good quality paper towels to wipe down after scrubbing a small area. Don't get too far ahead of yourself because the alcohol will dry quickly.
: : Good advice. I agree with all your points
: : Thanks.
: Someone please give me some advise on getting the paint out of wood grain.. The wood is walnut...I've done a good bit of refinishing but have never run across anything like this..Any advise would be greatly appriciated . Sharon asmedloc@bellsouth.net