Posted by Hank Metz on November 12, 1997 at 20:53:40:
In Reply to: Gluing Teak posted by Jim Reese on November 10, 1997 at 19:34:11:
: Can you give information on gluing Teak. Specifically, what is the proper method to reduce the oil present in the wood to ensure a good bond ?
To ensure the best joint fabrication, make sure the joints are fresh cut, use acetone to degrease the glue area. If this is going to be used in a marine environment, I would recommend a plastic resin glue as a minimum, with a two part glue system if may become submerged, such as a boarding ladder. Good Luck!